Seeram Ramakrishna | Materials Science | Excellence in Innovation Award

Published on by Book of Award

Prof. Seeram Ramakrishna | Materials Science | Excellence in Innovation Award

Tsinghua University | Singapore

Prof. Seeram Ramakrishna is a highly influential researcher in materials science and advanced engineering, with a distinguished scholarly record reflected by an h-index of 192, 2,251 documents, and approximately 174,820 citations across 123,939 citing publications. His research spans nanomaterials, sustainable materials engineering, energy storage systems, and environmental technologies, with a strong emphasis on translating fundamental science into scalable solutions. Recent publications highlight cutting-edge contributions to aluminum–air batteries through biomass-derived carbon quantum dots, defect-engineered electrocatalysts for lithium–sulfur batteries, photocatalytic hydrogen evolution using hierarchical sulfide systems, and bio-inspired materials for water purification, oil–water separation, and dust filtration. His work consistently integrates interfacial engineering, defect chemistry, and green material design to enhance electrochemical performance and environmental sustainability. Through an exceptional volume of high-impact publications and sustained citation influence, his research has significantly shaped contemporary directions in energy materials, functional textiles, and circular, eco-friendly material systems.

Citation Metrics (Scopus)

180k

135k

90k

45k

0

Citations
174,820

Documents
2,251

h-index
192

Citations

Documents

h-index


View Scopus Profile

Featured Publications

Electrospinning of nanofibres
– Nature Reviews Methods Primers, 2024, 4, 1
Intelligent Materials
– Matter, 2020, Volume 3, Issue 3, Pages 590–593

Yana Mourdjeva | Engineering | Best Researcher Award

Published on by Book of Award

Mrs. Yana Mourdjeva | Engineering | Best Researcher Award

Institute of Metal Science, Equipment and Technologies with Hydro- and Aerodynamics Centre – BAS | Bulgaria

Mrs. Yana Mourdjeva is a distinguished researcher at the Institute of Metal Science, Equipment, and Technologies with the Center for Hydro- and Aerodynamics “Acad. A. Balevski” at the Bulgarian Academy of Sciences (IMSETHC-BAS), serving in the Laboratory of Transmission Electron Microscopy (LMTC). She holds a Master’s degree in Machine Engineering from the Technical University of Sofia and a Ph.D. in Material Science and Technology of Machine Building Materials from IMSETHC-BAS. Her research focuses on materials science, characterization of metals and alloys, transmission electron microscopy, hydrogen embrittlement, nanomaterials, and superplasticity. With an h-index of 5, she has authored 18 scientific publications, including 8 with impact factors, and her work has received 64 citations. In recent years, she has actively contributed to projects funded by the Bulgarian National Science Fund and the EU Next Generation initiative, exploring advanced aluminum composites, amorphous alloys, and hydrogen embrittlement mechanisms. She has participated in international Erasmus collaborations at the Metallurgy Institute in Krakow, Poland, further enhancing her expertise in materials characterization. Her research outcomes have appeared in reputed journals such as Metals and Journal of Materials Engineering and Performance, strengthening the field’s understanding of microstructural evolution and performance of metallic materials.

Profiles : Scopus | Orcid

Featured Publications

Dyakova, V., Yanachkov, B., Valuiska, K., Mourdjeva, Y., Krastev, R., Simeonova, T., Kolev, K., Lazarova, R., & Katzarov, I. (2025). The impact of hydrogen charging time on microstructural alterations in pipeline low-carbon ferrite–pearlite steel. Metals. Multidisciplinary Digital Publishing Institute.

Lazarova, R., & Mourdjeva, Y. (2025, May 7). Microstructural explanation of the mechanical properties of Al–GNPs composites with Al₄C₃ produced by powder metallurgy method and extrusion. Journal of Information Systems Engineering and Management, 10(43s).

Lazarova, R., Anestiev, L., Mourdjeva, Y., Valuiska, K., & Petkov, V. (2025, March 5). Microstructural evolution, strengthening mechanisms, and fracture behavior of aluminum composites reinforced with graphene nanoplatelets and in situ–formed nano-carbides. Metals, 15(3).

Dyakova, V., Mourdjeva, Y., Simeonova, T., Krastev, R., Atanasov, I., Drenchev, L., & Kavardjikov, V. (2024). Microstructural analysis of 40X steel after strain-controlled fatigue. Journal of Theoretical and Applied Mechanics (Bulgaria).

Yanachkov, B., Mourdjeva, Y., Valuiska, K., Dyakova, V., Kolev, K., Kaleicheva, J., Lazarova, R., & Katzarov, I. (2024). Effect of hydrogen content on the microstructure, mechanical properties, and fracture mechanism of low-carbon lath martensite steel. Metals, 14.

Dyakova, V., Cherneva, S., Mourdjeva, Y., & Kostova, Y. (2024, June 30). Influence of the content of Ni as minority alloying element on the microstructure and mechanical properties of amorphous and ultrafine crystalline Al–Cu–Mg–Ni alloys. Proceedings of the Bulgarian Academy of Sciences.

Dyakova, V., Mourdjeva, Y., Spasova, H., Stefanov, G., & Kostova, Y. (2023). Effect of Cu as minority alloying element on glass forming ability and crystallization behavior of rapidly solidified Al–Si–Ni ribbons. Vide. Tehnologija. Resursi – Environment, Technology, Resources.

Dyakova, V., Mourdjeva, Y., Marinkov, N., Stefanov, G., Kostova, Y., & Gyurov, S. (2023). Effect of Ni as minority alloying element on glass forming ability and crystallization behavior of rapidly solidified Al–Cu–Mg–Ni ribbons. Journal of Chemical Technology and Metallurgy, 58(5).

Kolev, M., Lazarova, R., Petkov, V., Mourdjeva, Y., & Nihtianova, D. (2023). Investigating the effects of graphene nanoplatelets and Al₄C₃ on the tribological performance of aluminum-based nanocomposites. Metals, 13.

Mourdjeva, Y., Karashanova, D., Nihtianova, D., & Lazarova, R. (2023). Microstructural characteristics of Al₄C₃ phase and the interfaces in Al/graphene nanoplatelet composites and their effect on the mechanical properties. Journal of Materials Engineering and Performance.

Lazarova, R., Mourdjeva, Y., Nihtianova, D., Stefanov, G., & Petkov, V. (2022). Fabrication and characterization of aluminum–graphene nanoplatelets–nano-sized Al₄C₃ composite. Metals, 12(12).

Dyakova, V., Stefanov, G., Penkov, I., Kovacheva, D., Marinkov, N., Mourdjeva, Y., & Gyurov, S. (2022). Influence of Zn on glass forming ability and crystallization behaviour of rapidly solidified Al–Cu–Mg (Zn) alloys. Journal of Chemical Technology and Metallurgy, 57(3).

Dyakova, V., Stefanov, G., Kovacheva, D., Mourdjeva, Y., Marinkov, N., Penkov, I., & Georgiev, J. (2022). Influence of Zr and Zn as minority alloying elements on glass forming ability and crystallization behavior of rapidly solidified Al–Cu–Mg ribbons. AIP Conference Proceedings, 2449.

Lazarova, R., Mourdjeva, Y., Petkov, V., Marinov, M., Dimitrova, R., & Shuleva, D. (2022, December). Microstructure and mechanical properties of aluminum–graphene composites produced by powder metallurgical method. Journal of Materials Engineering and Performance, 31(12).

Jie Wang | Materials Science | Best Researcher Award

Published on by Book of Award

Prof. Jie Wang | Materials Science | Best Researcher Award

Qingdao Agricultural University | China

Prof. Jie Wang is an accomplished scholar in materials science, specializing in the design and construction of functional materials with applications in renewable energy, electrocatalysis, and advanced energy storage systems. He has authored over 100 publications in leading international journals, which have collectively garnered more than 6,580 citations, reflecting his significant research impact with an impressive h-index of 47. His research contributions span electrocatalysis for zinc-air and lithium-ion batteries, oxygen evolution and reduction reactions, water splitting, and the rational design of nanostructured materials such as transition metal sulfides, perovskites, and metal-organic frameworks. Prof. Wang has undertaken collaborative research at globally recognized institutions and serves as a corresponding or first author on numerous high-impact studies published in journals such as Advanced Materials, Advanced Functional Materials, Journal of Materials Chemistry A, and Energy Storage Materials. His work has been recognized through prestigious awards including multiple provincial and national-level prizes in natural science and outstanding research achievements. Alongside his publications, he has successfully led several major national and regional research grants focused on energy storage, electrocatalysis, and sustainable materials development. Through his extensive scholarly output, mentorship, and innovative research directions, Prof. Jie Wang continues to make influential contributions to advancing materials science and energy technologies.

Profiles : Scopus | Orcid | Google Scholar

Featured Publications

Author, A. A., Author, B. B., & Author, C. C. (2025). Porous carbon with predominant graphitic nitrogen and abundant defects mediated by reductive molten salt enables boosted sulfur conversion for room-temperature sodium-sulfur batteries. Chemical Engineering Journal.

Author, A. A., Author, B. B., & Author, C. C. (2025). Enhancing oxygen evolution electrocatalysis in heazlewoodite: Unveiling the critical role of entropy levels and surface reconstruction. Advanced Materials.

Author, A. A., Author, B. B., & Author, C. C. (2025). Optimizing aqueous zinc-sulfur battery performance via regulating acetonitrile co-solvents and carbon nanotube carriers. ChemSusChem.

Author, A. A., Author, B. B., & Author, C. C. (2025). Homogeneous bismuth dopants regulate cerium oxide structure to boost hydrogen peroxide electrosynthesis via two-electron oxygen reduction. Inorganic Chemistry Frontiers.

Author, A. A., Author, B. B., & Author, C. C. (2025). Promoting effect of copper doping on LaMO₃ (M = Mn, Fe, Co, Ni) perovskite-supported gold catalysts for selective gas-phase ethanol oxidation. Catalysts.

Author, A. A., Author, B. B., & Author, C. C. (2025). Structural regulation of NiFe LDH under spontaneous corrosion to enhance the oxygen evolution properties. ChemSusChem.

Author, A. A., Author, B. B., & Author, C. C. (2025). Exploring the efficiency of N, N-dimethylformamide for aqueous zinc-sulfur batteries. Science China Chemistry.

Author, A. A., Author, B. B., & Author, C. C. (2024). Expediting corrosion engineering for sulfur-doped, self-supporting Ni-Fe layered dihydroxide in efficient aqueous oxygen evolution. Catalysts.

Author, A. A., Author, B. B., & Author, C. C. (2024). Rational design of electrolyte additives for improved solid electrolyte interphase formation on graphite anodes: A study of 1,3,6-hexanetrinitrile. Energies.

Author, A. A., Author, B. B., & Author, C. C. (2024). Phase modulation of nickel-tin alloys in regulating electrocatalytic nitrogen reduction properties. Rare Metals.

Sanae Zriouel | Materials Science | Women Research Award

Published on by Book of Award

Prof. Sanae Zriouel | Materials Science | Women Research Award

Cadi Ayyad University | Morocco

Prof. Sanae Zriouel is an accomplished physicist with a strong research footprint, boasting 18 documents, 188 citations, and an h-index of 9. Her research encompasses graphene and related materials, physics of two-dimensional nanostructures, topological insulators, chalcopyrite semiconductors, perovskite structures, mathematical physics, and quantum and statistical physics, employing advanced numerical simulations including ab-initio calculations, DFT, Green functions, Monte Carlo, and molecular dynamics. She currently serves as Associate Professor of Physics at Cadi Ayyad University, Morocco, after holding positions as Assistant Professor at Sultan Moulay Slimane University and Researcher at Mohammed V University. Prof. Zriouel has a PhD in Mathematical Physics and a Habilitation Universitaire (HDR), complemented by engineering and bachelor degrees in electro-mechanics, physical sciences, and English studies. She has been recognized with numerous awards including full membership in OWSD and multiple national and international research honors. Prof. Zriouel has supervised over 30 master’s and bachelor students, contributed extensively to academic and research committees, coordinated national and international projects, and actively participated in more than 80 conferences. Her work in quantum materials, nanostructures, and simulations has significantly advanced theoretical and applied physics, reflecting her impact in the scientific community through research, mentorship, and collaborative projects worldwide.

Profiles : Scopus | Orcid | Google Scholar

Featured Publications

Amzaoued, M., Zriouel, S., & Mabrouki, M. (2025). DFT computational modeling studies of electronic and magnetic features of transition metal doped ZnTe. Physics Open, 24, 100275.

Ahsan, J., Rather, M., Sultan, K., Zriouel, S., & Hlil, E. (2025). In-depth study of double perovskite Sr₂NiTaO₆: Structural, electronic, thermoelectric, and spintronic properties for sustainable and high-performance applications. Computational Condensed Matter, 43, e01026.

Zriouel, S., Mhirech, A., Kabouchi, B., Bahmad, L., Fadil, Z., Husain, F., & Raorane, C. (2025). Investigating thermodynamic and magnetic behavior of graphullerene-like nanostructure using Monte Carlo techniques. Philosophical Magazine, 1–14.

Saber, N., Zriouel, S., Mhirech, A., Kabouchi, B., Bahmad, L., & Fadil, Z. (2023). Magnetic properties and magnetocaloric effects of the graphullerene-like 4−(Mg₄C₆₀) nanostructure: A Monte Carlo study. Modern Physics Letters B, 38, 2350199.

Zriouel, S., & Jellal, A. (2022). Engineering quantum tunneling effect of carriers in silicene field-effect transistors. arXiv preprint arXiv:2212.06072.

Zriouel, S. (2021). Phase transitions and critical dielectric phenomena of janus transition metal oxides. Materials Science and Engineering B, 267, 115087.

Zriouel, S., et al. (2020). Effect of p−d hybridization on half-metallic properties of some diluted II−IV−V₂ chalcopyrites for spintronic applications. Physica Scripta, 95, 045809.

Zriouel, S. (2020). Phase transitions and compensation behavior of graphene-based Janus materials. Journal of Magnetism and Magnetic Materials, 493, 165711.

Taychour, B., Zriouel, S., & Drissi, B. (2018). Half-metallic ferromagnetic character in ZnXP₂ (X = Ge, Si) chalcopyrites doped with Mn. Journal of Superconductivity and Novel Magnetism, 1–7.

Saidi, S., Zriouel, S., Drissi, B., & Maaroufi, M. (2018). First principles study of electronic and optical properties of Ag₂CdSnS₄ chalcogenides for photovoltaic applications. Computational Materials Science, 152, 291–299.

Saidi, S., Zriouel, S., Drissi, B., & Maaroufi, M. (2018). A DFT study of electro-optical properties of kesterite Ag₂CdSnX₄ for photovoltaic applications. Physica E, 103, 171–179.

 

Anding Xu | Energy | Best Researcher Award

Published on by Book of Award

Assist. Prof. Dr. Anding Xu | Energy | Best Researcher Award

South China University of Technology | China

Assist. Prof. Dr. Anding Xu is a distinguished researcher in the field of energy storage materials with a focus on advanced sodium-ion and potassium-ion battery technologies. Holding a PhD in Materials Science and Engineering from South China University of Technology (SCUT), he has conducted pioneering research on heteronanostructure interfaces, 2D and porous nanomaterials, novel nanoscale architecture design, and electrode materials surface engineering to enhance energy storage mechanisms. Prior to his PhD, he earned a Master’s degree in Chemical Engineering from SCUT and a Bachelor’s degree in Light Chemical Engineering from Xi’an Polytechnic University. Dr. Xu has served as a Postdoctoral Fellow and currently as an Assistant Research Fellow at the School of Emergent Soft Matter, SCUT, where he focuses on controllable synthesis, interface structure regulation, and the sodium storage mechanism of carbon-based antimony single atoms and clusters composites. With 24 publications, 588 citations, and an h-index of 15, his work has appeared in high-impact journals including Small, Advanced Functional Materials, Journal of Materials Chemistry A, and ACS Applied Materials & Interfaces, covering topics such as MOF-derived porous carbon, Sb atomic clusters, Bi@N-doped carbon sheets, and high-performance anode materials. His research contributions have significantly advanced the understanding of nanostructured electrode materials, demonstrating exceptional potential for next-generation, high-rate, long-life energy storage solutions.

Profile : Scopus

Featured Publications

  • "MOF-Derived Hierarchically Porous Carbon with Orthogonal Channels for Advanced Na-Se Batteries"

  • "Constructing High-content Sb Atomic Clusters and Robust Sb-O-C Bond in Sb/C Composites for Ultrahigh Rate and Long-Term Sodium Storage"

  • "2D Bismuth@N-Doped Carbon Sheets for Ultrahigh Rate and Stable Potassium Storage"

  • "Sb2O3@ Sb nanoparticles impregnated in N-doped carbon microcages for ultralong life and high-rate sodium ion batteries"

  • "Ultrahigh Rate Performance of Hollow Antimony Nanoparticles Impregnated in Open Carbon Boxes for Sodium-Ion Battery under Elevated Temperature"

  • "Alloyed BiSb Nanoparticles Confined in Tremella-Like Carbon Microspheres for Ultralong-Life Potassium Ion Batteries"

  • "CuSe2 Nanocubes Enabling Efficient Sodium Storage"

  • "Confining MoSe2 Nanosheets into N-Doped Hollow Porous Carbon Microspheres for Fast-Charged and Long-Life Potassium-Ion Storage"

  • "Enhanced pseudocapacitance contribution to outstanding Li-storage performance for a reduced graphene oxide-wrapped FeS composite anode"

  • "Sulfur/Nitrogen Co-Doped In-Plane Porous Carbon Nanosheets as Superior Anode of Potassium-Ion Batteries"

 

 

Chun-Liang Chang | Materials Science | Best Researcher Award

Published on by Book of Award

Dr. Chun-Liang Chang | Materials Science | Best Researcher Award

National Atomic Research Institute | Taiwan

Author Profile

Scopus

🌱 Early Academic Pursuits

Dr. Chun-Liang Chang laid a strong academic foundation in materials science and optoelectronics at the prestigious National Sun Yat-sen University in Taiwan, where he earned both his Master’s and Doctoral degrees. His academic journey was marked by deep curiosity for high-temperature materials and solid-state energy technologies—an interest that soon transformed into a lifelong research mission.

🏛️ Professional Endeavors

With more than two decades of experience, Dr. Chang has steadily risen through the ranks of research leadership. He currently serves as Deputy Director of the Department of Physics at NARI, while also leading critical national projects on plasma-sprayed metal-supported solid oxide cells (SOC). His career path includes key appointments at the Institute of Nuclear Energy Research, and a formative stint as a Visiting Researcher at NRC-IFCI in Canada, underscoring his global research influence.

🔬 Contributions and Research Focus

Dr. Chang’s work has significantly advanced the field of solid oxide fuel and electrolysis cells, with a special emphasis on atmospheric plasma spraying (APS) techniques. His innovations in hydrogen generation at high temperatures and solid-state battery development are pushing the boundaries of energy conversion and storage technologies. His efforts directly support the clean energy transition by enhancing the efficiency, scalability, and material resilience of SOC systems.

🏆 Accolades and Recognition

Dr. Chang's contributions have not gone unnoticed. His pioneering research has earned him:

  • ➤The Platinum Award at the Taipei International Invention & Technology Expo (2012) 🥇

  • ➤A Gold Medal from the Nuremberg International Invention Exhibition (2016) 🏅

  • ➤The prestigious 13th National Innovation Award in Taiwan (2016) for academic excellence 🎓

  • ➤Multiple Outstanding R&D Service Performance Awards from the Ministry of the Interior (2011, 2012) 🇹🇼

These accolades affirm his role as a national asset in Taiwan's innovation ecosystem.

🌍 Impact and Influence

Through his leadership in government-backed R&D projects and international collaborations, particularly in Canada, Dr. Chang has accelerated the application of advanced plasma and SOC technologies. His insights have helped align research output with industrial needs, creating scalable solutions in decarbonized energy systems and promoting cross-border technological exchange.

🌟 Legacy and Future Contributions

Dr. Chun-Liang Chang stands at the forefront of materials innovation in energy technology. With his current projects focused on solid-state battery optimization and metal-supported SOC fabrication, his work promises to revolutionize energy infrastructure and storage systems. His legacy will be one of bridging fundamental science with real-world impact, training future leaders, and driving Taiwan's role in sustainable technology development.

Publications

📄 Fabrication and Electrochemical Performance of Reversible Metal‑Supported Solid Oxide Cells via Atmospheric Plasma Spraying

Authors: Chun‑Liang Chang, Chun‑Huang Tsai, Chang‑Shiang Yang, Ching‑Yun Yang, et al.
Journal: Electrochimica Acta
Year: 2025

📄Effect of Electric Current on Cathode‑Side Contact Resistance in SOFC Stacks

Authors: Wei‑Ja Shong, Chien‑Kuo Liu, Wei‑Xin Kao, Chun‑Huang Tsai, Chun‑Liang Chang, Yung‑Neng Cheng
Journal: International Journal of Hydrogen Energy
Year: 2025

📄 Characterization of Thin Metal‑Supported Solid Oxide Fuel Cells Fabricated through Atmospheric Plasma Spraying

Authors: C. Tsai, C. Yang, C. Chang, et al.
Journal: Fuel Cells
Year: 2023

Argyro Klini | Physics and Astronomy | Best Researcher Award

Published on by Book of Award

Dr. Argyro Klini | Physics and Astronomy | Best Researcher Award

Institute of Electronic Structure and Laser of the Foundation for Research and Technology-Hellas | Greece

Author profile

Scopus

Orcid

Google Scholar

🎓 Early Academic Pursuits

Dr. Argyro Klini's academic journey began at the University of Crete, where she obtained her B.Sc. in Physics in 1991. She further honed her scientific acumen with an M.Sc. in Applied Molecular Spectroscopy (2004), followed by a Ph.D. in Physical Chemistry (2013) from the same institution. Her doctoral thesis focused on the growth, properties, and applications of ZnO nanostructures, under the guidance of Prof. Demetrios Anglos. These foundational years laid the groundwork for her expertise in laser-based materials synthesis and spectroscopy.

🧪 Professional Endeavors

Dr. Klini has had a distinguished career at IESL-FORTH, where she currently serves as a Principal Application Scientist since 2017. Previously, she was part of the technical research staff from 2000 to 2017, and her professional experience includes a tenure at the Lawrence Berkeley National Laboratory in California. Her earlier affiliations include the Association for Research Technology and Training (ARTT-FORTH) and the Foundation for Research and Technology – Hellas, where she began her journey as a scholar. Her professional trajectory reflects a consistent dedication to applied research and technological innovation.

🔬 Contributions and Research Focus

Dr. Klini's research spans advanced laser techniques such as Pulsed Laser Deposition (PLD) and Laser-Induced Forward Transfer (LIFT) for the development of thin films and micro-patterned structures. Her work on photoluminescence spectroscopy for gas sensing has significantly advanced the field of environmental monitoring. She has led multiple bilateral and European Commission-funded research projects and has been an integral part of landmark initiatives like RIANA, NEP, and Laserlab Europe-V. She has published 66 articles in peer-reviewed journals, contributed 9 international conference proceedings, 1 book chapter, and holds a Greek patent. Her studies on materials like ZnO, graphitic carbon nitride, and Ni-Fe electrodes have had wide-ranging applications from photocatalysis to hydrogen generation.

🏆 Accolades and Recognition

Dr. Klini’s scientific rigor is reflected in her impressive citation metrics: over 1100 citations on Google Scholar, an h-index of 21, and an i10-index of 35. Her scholarly visibility and impact continue to grow, with annual citations trending upward. Her work has been showcased at major conferences including SPIE Photonics Europe, COLA, and CLEO Europe, where she delivered multiple invited oral presentations. She has also contributed as a reviewer for high-impact journals and played key roles in organizing prestigious conferences such as COLA'03 and COLA'24.

🌍 Impact and Influence

Through her pioneering research in laser-material interactions and nanostructured materials, Dr. Klini has helped shape critical domains such as renewable energy technologies, optical sensing, and advanced coatings. Her collaborative projects span across Europe and the US, establishing her as a vital bridge between academia and technological innovation. Her scientific contributions are not only theoretically significant but also address real-world challenges in environmental monitoring and energy conversion.

🚀 Legacy and Future Contributions

With a career defined by scientific excellence, innovation, and international collaboration, Dr. Argyro Klini continues to be a trailblazer in applied physical chemistry and materials science. Her commitment to mentoring, teaching, and interdisciplinary research ensures a lasting legacy. As new challenges in energy and environment emerge, her expertise and leadership will remain essential in crafting solutions rooted in advanced material science and laser technologies.

 

Publications

  • 📄 Graphitic carbon nitride (g-C3N4) optical sensors for environmental monitoring
    Authors: S. Kokkotos, E. Vasilaki, L. Sygellou, M. Vamvakaki, A. Klini
    Journal: Diamond and Related Materials
    Year: 2025
  • 📄 A novel physical vapor deposition setup applying high-frequency currents: Deposition of Cu thin films
    Authors: I.A. Poimenidis, M. Liapakis, A. Klini, M. Konsolakis, P.A. Loukakos
    Journal: Vacuum
    Year: 2025
  • 📄 Electronic relaxation in PLD TiO₂ films processed with femtosecond UV-laser
    Authors: L. Museur, A. Klini, L. Papoutsakis, C. Colbeau-Justin, A.V. Kanaev
    Journal: Chemical Physics Letters
    Year: 2024
  • 📄 Processing and Functionalization of Vertical Graphene Nanowalls by Laser Irradiation
    Authors: S. Chaitoglou, A. Klini, N. Papakosta, P.A. Loukakos, E. Bertran-Serra
    Journal: Journal of Physical Chemistry Letters
    Year: 2024
  • 📄 Ni foam electrodes decorated with Ni nanoparticles via pulsed laser deposition for efficient hydrogen evolution reaction
    Authors: I.A. Poimenidis, N. Papakosta, A. Klini, M. Konsolakis, P.A. Loukakos
    Journal: Materials Science and Engineering B
    Year: 2024

 

Sanboh Lee | Materials Science | Best Researcher Award

Published on by Book of Award

Prof. Sanboh Lee | Materials Science | Best Researcher Award

National Tsing Hua University | Taiwan

Author Profile

Scopus

Orcid

🌱 Early Academic Pursuits

Prof. Sanboh Lee's journey into materials science began with a BS in Physics from Fu Jen Catholic University (1970), followed by an MS in Physics from National Tsing Hua University (1972). His academic curiosity led him to pursue a PhD in Materials Science at the University of Rochester (1980), where he built a strong foundation in material properties and mechanics.

💼 Professional Endeavors

With a career spanning decades, Prof. Lee has been a Professor at National Tsing Hua University (1985-2018) and served as an Adjunct Professor at the University of Science and Technology Beijing since 2005. His global research contributions include visiting scholar roles at Lehigh University and guest scientist positions at the National Institute of Standards and Technology (NIST). His consultancy work with institutions like the University of Rochester, Oak Ridge National Laboratory, and the University of Tennessee reflects his expertise in materials engineering.

🔬 Contributions and Research Focus

Prof. Lee’s research spans dislocation mechanics, optical and mechanical properties of polymers, hydrogen transport in low-carbon steels, and semiconductor devices. His groundbreaking studies include:

  • Dislocation and crack interactions in materials.
  • Gamma-ray effects on optical and mechanical properties.
  • Nano-imprint technology and micro-machining innovations.
  • Diffusion-induced and thermal stresses in materials.
  • Polymers and composite materials with enhanced mechanical and optical properties.
    With over 280 journal publications and 150 conference presentations, Prof. Lee has significantly shaped modern material science.

🏆 Accolades and Recognition

Prof. Lee has received numerous international awards, including:

  • Lifetime Achievement Award (2022) by VDGOOD® Professional Association.
  • SAS Eminent Fellow Membership (2021).
  • Fellow, Materials Research Society-Taiwan (2009).
  • Tsing Hua Chair Professor (2006-).
  • Fellow, ASM International, USA (2004) for contributions to fracture mechanics and transport processes in metals and polymers.
  • Outstanding Special Research Fellow (2002) by the National Science Council of Taiwan.
  • Who’s Who in Science and Engineering and other global recognitions in research excellence.

🌍 Impact and Influence

As an influential figure in materials science, Prof. Lee has contributed to academic committees, international symposia, and editorial boards. He has been an advisor, editor, and organizer for numerous scientific events and research journals. His leadership roles in organizations such as TMS, Materials Chemistry and Physics, and the Asia Pacific Academy of Materials underscore his global impact in material research and engineering.

🔮 Legacy and Future Contributions

Prof. Lee’s pioneering work in materials science, fracture mechanics, and nanotechnology continues to inspire new generations of researchers. His advancements in nano-imprint technology, hydrogen transport, and semiconductor materials are paving the way for next-generation engineering applications. As a Professor Emeritus, his legacy endures through ongoing collaborations, mentorship, and research innovations that will influence future breakthroughs in materials engineering and nanotechnology.

Publicaations

📄 Kinetic Analysis of the Cracking Behavior in Methanol-Treated Poly(methyl methacrylate)/Functionalized Graphene Composites

  • Journal: Journal of Composites Science
  • Year: 2025
  • Authors: Bing-Hong Yang, Shou-Yi Chang, Yulin Zhang, Fuqian Yang, Sanboh Lee

📄 Cracking in UV-Irradiated Poly(methyl methacrylate)/Functionalized Graphene Composites: Solvent Effect

  • Journal: Journal of Polymer Research
  • Year: 2024
  • Authors: Bing-Hong Yang, Shou-Yi Chang, Yulin Zhang, Fuqian Yang, Sanboh Lee

📄 Analysis of the Thermal Aging Kinetics of Tallow, Chicken Oil, Lard, and Sheep Oil

  • Journal: Molecules
  • Year: 2024
  • Authors: Yun-Chuan Hsieh, Hao Ouyang, Yulin Zhang, Donyau Chiang, Fuqian Yang, Hsin-Lung Chen, Sanboh Lee

📄 Creep-Recovery Deformation of 304 Stainless-Steel Springs Under Low Forces

  • Journal: Mechanics of Materials
  • Year: 2024
  • Authors: Ming-Yen Tsai, Shou-Yi Chang, Yulin Zhang, Fuqian Yang, Sanboh Lee

📄 A Mechanical Model for Stress Relaxation of Polylactic Acid/Thermoplastic Polyurethane Blends

  • Journal: Journal of Composites Science
  • Year: 2024
  • Authors: Yi-Sheng Jhao, Hao Ouyang, Chien-Chao Huang, Fuqian Yang, Sanboh Lee

 

Hamid Reza Lashgari | Engineering | Best Researcher Award

Published on by Book of Award

Dr. Hamid Reza Lashgari | Engineering | Best Researcher Award

SRG Global Asset Care | Australia

Author Profile

Scopus

Early Academic Pursuits

Dr. Hamid Reza Lashgari embarked on his academic journey by completing a degree in Metallurgy and Materials Science and Engineering from the University of Tehran in 2008. He further pursued his academic aspirations by obtaining a Materials Engineering degree from UNSW, Sydney, graduating in 2015.

Professional Endeavors

Dr. Lashgari has cultivated a distinguished career path characterized by his roles as a Metallurgist/Materials Engineer at ALS/SRG Global, a Technical Officer at UNSW School of Materials Science, and a Materials Engineer at TECHNICO, Asset Integrity Department.

Contributions and Research Focus

With over 7 years of experience, Dr. Lashgari has specialized in failure analysis of metals and alloys, welding, corrosion analysis, and advanced materials characterization techniques. His research focuses on fitness-for-service assessment, risk-based inspection studies, and mechanical testing, among other areas.

Accolades and Recognition

Dr. Lashgari's contributions have been recognized through numerous honors and awards, including tuition fee scholarships and certificates of reviewing from esteemed journals. He has also received accolades for his pioneering work in establishing the Asset Integrity Department at TECHNICO.

Impact and Influence

Dr. Lashgari's research publications, which span various prestigious journals, attest to his significant impact on the field of materials engineering. His work has contributed to advancements in failure analysis, computational modeling, and the development of innovative materials.

Legacy and Future Contributions

Through his dedication to advancing materials engineering and his commitment to excellence, Dr. Lashgari has established a legacy of impactful research and professional achievements. His future contributions are poised to further enrich the field, driving innovation and addressing critical challenges in materials science and engineering.

Notable Publications

Fitness-for-Service Assessment of a Hydrogen-Induced Crack in an Inlet Gas Separator Pressure vessel using Computational Modelling 2024

Numerical and experimental failure analysis of wind turbine blade fastener 2024

Failure Analysis of a Fractured Pallet Hook 2023

Heat treatment response of additively manufactured 17-4PH stainless steel 2023 (10)

Dry sliding wear characteristics, corrosion behavior, and hot deformation properties of eutectic Al–Si piston alloy containing Ni-rich intermetallic compounds 2022 (7)